The Vantage now comes as a single line machine,
the Vantage 76-1 NC, with automated programming for 4 lines of holes.
The Vantage 152 NC is a programmable dual 76 spindle
(152 total) drill for fast production of system line holes.
Once initiated the Vantage will automatically drill up to four
lines of holes. A program is chosen either by entering
the program code at the keypad or by barcode.
The drilling motion is completely controlled hydraulically
for a constant feed speed and chip free boring on most coated
panels. Together with the concept of boring from below this
design is cleaner, safer and prolongs tooling life.
- Two lines, 76 spindles each, 152 spindles
total.
- Each head moves independantly by NC control
with 99 program capacity. Drill head travel
speed in y-axis is 10 inches per second.
- Programmable for up to four lines of holes.
- Hydraulic control for even drilling cycle and
bore thru of the work piece with no chip out
cutting production time by 65% for partitions.
- Back boring unit travels from 20 - 220mm
and front drill head travels from 200 - 580mm.
- End stops are adjustable to 150mm.
- Fast cycle time of 6 seconds for two lines
and 14 seconds for three or four lines of holes.
The menu based programming, barcode capabilities and the touch screen make setting up for different workpieces easy. The computer holds 99 programs. The screen shows a three line program is loaded.
