The Logic 130 gives the customer an option for a longer table at a price point well below the Index Trend. So now there's a choice between the smaller Logic 70 and the Trend 130. The machine has a larger touch screen and 1300 mm working table.

Options include GIC, a second tank for water for flushing, center fence for four position production and additional hold down clamps.

The Vantage 76 is an eight ft. capacity, NC controlled, automatic line boring machine. Like the Vantage 152 this machine will half or thru bore up to four lines of holes automatically according to NC programming. The machine will complete two lines of holes in an eight foot panel in about 12 seconds. It will also produce clean thru bores on most coated panels.

The DB 21 is a newly designed universal construction boring machine from
Gannomat that replaces the very successful Optima series machines offered over the last decade. New manufacturing techniques and state-of-the-art electrical components make possible significant advancements in the design, performance, and ultimately, the value of the DB 21. In total, there are nine new design features on the DB 21 as follows: PLC replaces pneumatic logic. There's a larger torsion table.

1. PLC replaces pneumatic logic for all timing functions.
2. Larger torsion working table.
3. Newly designed backstops
4. Larger gas assist cylinder for raising and lowering drilling aggregate
5. Drilling aggregate now incorporates very robust 40 mm bearings and larger struts for horizontal and vertical travel.
6. The fence attachment for thru boring (of fixed partitions, etc)has been designed so that it is both easy and fast to install.
7. The pneumatic hold-down clamps are now adjustable in all three axes: side-to-side, front-to-back, and up-down.
8. Electrical and pneumatic components are all grouped in an easily accessed and front-mounted control module.
9. Dust collection has been integrated into the design of the machine.  Airborne dust can now be efficiently removed by attaching a dust collector.