Specifications:

-Dowel Diameters 6, 8, 10, 12mm (different dowel diameter kit required for each size)
-Dowel length adjustable from 25-50mm
-Working capacity 45 dowels per minute.
-Electrical 110V, 1ph, 60hz
-Air pressure 85psi
-Weight 240 lbs
-Footprint 26"x26"x44"h

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control panel layout gives the operator full control from the front of the machine.
  • Dowel feeding by maintenance-free hopper/vibrator.
  • Easy mechanical system of dowel selection for dowel diameter and dowel length controlled by electronic limit switches with immediate error indication of incorrect dowel length (+/- 2mm).
  • Immediate ejection of the defective dowel by pressing the error light button.
  • Fully automatic maintenance-free electronic controller with program selection of:
          1: cleaning
          2: gluing
          3: gluing / inserting
  • 8 position selector switch regulates glue amount by means of an electronically controlled timer. Essential for different dowel size and diameter and various glue viscosity.
  • Completely closed glue system with conical seated front nozzle that eliminates both the hardening of the glue in the nozzle and the need for routine cleaning of the glue system.
  • A 6 bar high-pressure system for the glue injection guarantees precise glue stream and clean dowel inserting.
  • Glue/Water selector switch for occasional rinsing of the entire system.
  • Control light for indicating low volume of glue in the glue pot.
  • 1 stainless steel pot for 5 kg of glue (1.5 gallon).
  • 1 stainless steel pot for 5 liters of water (1.5 gallon).
  • Machine mobile on casters.
  • Light and easily handled recoilless pistol weighing only 1.9 kg (4 lbs.).
  • Maintenance-free pistol mechanism using time-tested staple gun parts and technology.
  • Multi-function system of repeated gluing/inserting, gluing/inserting by constant depression of the pistol trigger.
  • The revolver magazine of the pistol guarantees a constant supply of dowels for the fastest possible operating cycle.
  • Dowels are not inserted to the bottom of the hole but rather are regulated by the length outside the panel. No splitting of thin material or glue being forced back out of the hole. Panel kick back is eliminated and no clamping of the work piece or additional backstop is necessary.